Re: how can I oc a p4 with hyperthreading ill include information on it in post


[ Follow Ups ] [ Post Followup ] [ CPU-Central Message Board ] [ Home ]

Subject: Re: how can I oc a p4 with hyperthreading ill include information on it in post
Name: LED
Date: 5/17/2006 5:42:19 AM (GMT-7)
IP Address: 71.55.33.123
In Reply to: Re: how can I oc a p4 with hyperthreading ill include information on it in post posted by john
Message:

Start raising the FSB in small increments as high as it will go without it locking up and you may have to push the volts up a tad depending on the RAM and CPU...Be careful not to over do/heat it...
Once it doesn't run stable then back it off about 5MHz...Becareful and WATCH THE TEMPS!

Little help @TL

[ View FollowUps | Post Followup | Main ]
Tweaktown


[No follow-ups for this posting]

Post a Followup

Name:
E-Mail:

Subject:

Comments:

Optional Link URL:
Link Title:
Optional Image URL:
Upload some images for this post


[ Follow Ups ] [ Post Followup ] [ CPU-Central Message Board ]