Re: Molex connector voltage


[ Follow Ups ] [ Post Followup ] [ CPU-Central Message Board ] [ Home ]

Subject: Re: Molex connector voltage
Name: Bob
Date: 5/1/2006 6:12:13 AM (GMT-7)
IP Address: 68.43.168.23
In Reply to: Re: Molex connector voltage posted by Cristi
Message:

If the wire to the floppy drive is smaller then the HD cable ? I then recommend tapping into a existing HD cable. This makes no real difference as all 5 & 12 volt wires are wired to the same point inside of Power Supply.
Ya the only risk is miss wiring the plug or shabby & exposed bare wires that can short out or very few wire strands left after stripping off the insulation. For fast work now days I use wirenuts like house wiring type only smaller & to make it safer you could add electrical tape to cover both ends of the wirenut.
Bob

[ View FollowUps | Post Followup | E-Mail Sender | Main ]


[No follow-ups for this posting]

Post a Followup

Name:
E-Mail:

Subject:

Comments:

Optional Link URL:
Link Title:
Optional Image URL:
Upload some images for this post


[ Follow Ups ] [ Post Followup ] [ CPU-Central Message Board ]