|
Subject: Tyan Thunder S2462
Name:
Solo
Date: 7/26/2002 11:59:10 PM (GMT-7)
IP Address: 216.178.143.30
Message:
I well I am getting an education on how to build a 2U server.
First I now own two power supplies that will not work with this mobo in a 2U case.
My problem is that I am unable to get the mobo to post with both of the 512MB Corsair (Nanya) sticks installed.
If slot 1 and 2 are occupied = no post
If slot 1 and 3 are occupied = no post
If slot 1 and 4 are occupied = Post but only 512
Either stick will post in slot 1
Same result if 1 and 4 are switched.
While I am at, it I seem to be having difficulty setting up the 2 SCSI drives to mirror. On start up only 1 of the drives gets detected. I have them both connected on channel A with a terminator. I have not seen any menu where I can select what raid level to use. Any help would be appreciated.
|